Pellet Stove Furnace

Pellet stoves are offered as freestanding units or fireplace inserts that can give your home the appearance of a traditional wood-burning fireplace. They are available as freestanding units or fireplace inserts that give your home the appearance of traditional wood-burning fireplaces.

The auger transports the pellets out of the hopper into the combustion chamber which is where they burn and produce heat. Sensors monitor the flame and can adjust the speed of operation to maintain the desired temperature of the room.

1. Energy Efficiency

Pellet stoves burn a renewable non-toxic fuel composed of compressed sawdust wood chips, bark and other materials normally placed in landfills but which can be turned into a sustainable and clean source of heating. They aid homeowners in reducing their energy use and consequently greenhouse gas emissions. Many homeowners who own pellet stoves report recouping their initial investment in just several years with lower heating bills.

Pellets are extremely compressed and are more dense than natural wood, making them more efficient to burn. They also produce less creosote than traditional wood-burning fireplaces. They are also packaged in plastic bags that block out moisture and require less frequent cleaning.

Like other heating systems pellet stoves need to be properly sized and vented. A professional technician can evaluate your venting requirements and space requirements to achieve the most efficient results.

During installation, the hearth is built to size and the vent is installed through a pre-cut hole in your home's siding. The vent can be run out the side wall or the roof, depending on your preference and local regulations.

After the hearth and vent are finished and the stove is ready to be connected. Certain manufacturers offer a remote control to make it simple to start and maintain the fire, while others offer additional sensors that check airflow and combustion as well as flue temperatures and pressure. When the system detects it requires more pellets or less, it will signal to the auger to accelerate or slow it down in line with the needs.

All stoves have an hopper for storage that can hold from 35 to 130 pounds of pellets until needed. The size of the hopper will determine the frequency at which you have to replenish your stove. Larger hoppers can be used for longer periods before a refill is required. A grille draws fresh air out of the room and then passes it over a heat exchanger, which then blasts heated air into the living space by convection. A grate or auger distributes the pellets, and a pan underneath is used to collect any burned ones along with combustion residue.

While pellet stoves are more efficient than wood-burning models, they're not as efficient as natural gas furnaces or electric heaters. The electric components that drive their motorized components require an electrical supply which could cause an issue during a power outage, though backup systems are in place like batteries and generators.

2. Low Maintenance

Pellet stoves are incredibly efficient, but like any other major heating appliance, they require a bit of maintenance to ensure that they function properly. Cleaning your stove's exhaust vent and the stove will stop the build-up of harmful creosote which could cause an explosion, fire, or damage to your home or stove.

A pellet stove makes use of compressed natural particles (such as kernels, nutshells of corn or tiny pieces of scrapwood) made from wood or other substances. The pellets are inserted into the combustion chamber by an auger that is powered by electricity. The thermostat you set regulates the speed at which pellets are fed to the burner. The fire can be kept burning, or it can be modulated lower and even extinguished in accordance with the temperature you set. When the fire is out the ash is then thrown into an empty ash tray underneath the burner, which can be easily removed and then disposed of.

Pellets are made from waste products that would have been thrown away during the process of processing lumber. They are renewable and release much less dust into the air than traditional wood-burning stoves making them a cleaner burning heat source. The amount of carbon monoxide, carcinogens, and other harmful chemicals emitted by pellet stoves is also much lower than those with modern wood stoves that are EPA-certified.

Because of the low emissions they produce, these stoves don't require to be vented through a chimney like traditional wood stoves, but should be properly vented through a wall or another external structure. Pellet stoves come with flue ports that open on the rear or top of the appliance and are connected to the vent pipe which extends outside of the home.

One drawback of a pellet stove is that you have to purchase or store enough pellets to last the winter time. On average, owners of pellet stoves use three tons of pellets over the course of winter, at a cost of $200 for each ton. The expenses can add up however they are much cheaper than purchasing firewood and hauling it for a fireplace or wood-burning stove. Make sure that you purchase enough pellets to ensure your stove will work through the coldest winter months, and you have a suitable space to store the pellets (preferably cool, dry and off the ground).

3. Reduce carbon footprint

Pellet stoves produce heat using renewable biomass fuel, reducing the dependence on fossil fuels that are finite. This reduces carbon footprints and increases the diversity of energy sources for homes.

Even the most modern woodstoves that are EPA certified emit considerably less than pellet stoves. The emissions from pellet stoves also are much lower than ones from gas furnaces. Pellets are made from sawdust and bark as well as other lumber remnants. They can also include soybeans, corn or other agricultural waste. When they are burned, they release less particulates (leading to respiratory problems and allergies) as well as carcinogens, carbon monoxide and nitrogen oxides.

The feed system is the primary difference between a pellet stove and a wood stove. Pellet stoves come with hoppers to store the pellets. When the thermostat or sensors signal that the room is in need of heating, the auger turns and the pellets are fed into the combustion chamber, where they burn and generate heat. The air that is released from the combustion chamber flows through a heat exchanger which transfers the heat to the blower and out into the room. This process results in very low emissions and no creosote accumulation.

After the hopper is empty, a cyclone removes the ash and places it in an ash jar. The stove also contains an air circulator to move the clean, heated air throughout the living area. The majority of pellet stoves require little maintenance and come with a huge viewing area for you and your loved ones to enjoy the flames.

The quality of pellets is the primary factor that affects pellet stove emissions. The poor quality pellets will result in more emissions. When choosing your pellets, make sure they meet certain standards and don't contain other ingredients like urea or petroleum-based products. Also make sure you choose a manufacturer who offers a warranty and will repair or replace parts in case of a problem. Some states offer homeowners an incentive to pay taxes in the event that they decide to go even greener. This is a great opportunity to help offset the initial cost of this type of stove and make installation more affordable.

4. Reduced Noise

Pellet stoves produce very little smoke or exhaust when compared to fireplaces with wood here burning. A fan is employed to spread heat more evenly across the room. This is a major reason pellet stoves need less maintenance than wood stoves. While wood stoves must be regularly cleaned of particulates and chemicals, pellet stoves only need an specialized metal vacuum cleaner for regular cleaning.

Many manufacturers have designed their stoves in a way that they are easy to install and operate, as well as maintain. Their appliances are available in a variety of styles that match the decor of your home. Certain models come with an app for WIFI, a programmable thermostat and remote control.

Most pellet stoves come with an enormous fuel hopper that can hold anywhere from 35 to 130 pounds of pellets. The pellets are then pumped into the combustion chamber using an auger. The speed at which pellets are fed to the burner determines how hot the flame is as well as the amount of heat it produces. The hopper can be filled with hardwood pellets (from dense wood species like oak and hickory) or softwood pellets (from pine and fir). Many stoves are able to use biomass pellets made of switchgrass and corn. This is an environmentally friendly alternative.

Pellet stoves emit less smoke and require less maintenance since they use a cleaner fuel than wood-burning fireplaces. They also do not require a chimney, making them a much more suitable option for new construction or retrofits.

In contrast to wood stoves, which require regular maintenance to be free of creosote as well as other chemicals, pellet stoves only require periodic inspections to ensure proper operation and maintenance. Based on the model, this could include a regular inspection and cleaning of the accumulated the ash or "clinker," as well as the motor and fans. Your appliance dealer can explain the correct procedures for your specific brand and model. He can also help you identify the right fuel for your stove, and give information regarding storage and safety.